 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Installing a A/C condenser motor
I am replacing a defective A/C condenser motor (K55HXMHS6410) which has three wires coming from the motor (yellow, black, and brown). The new motor I am trying to reinstall is a 554 outdoor condenser fan motor which has a black, white, brown/white, brown and red wire. How do I reinstall the new motor which has different wiring to my current A/C unit.
|
||||
|
||||
|
Are you sure you have the correct motor?
Did you get a new capacitor that matches the new motor? Usually the brown and brown white go to the capacitor. To hook up there is a wiring diagram on the side of the motor. They ALL have them. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...
Ijust replace the condenser fan on my rheem ac unit.The old fan had three wire brown yellow and black ,the new fan have four wire two browns yellow and black.I was told by the saleman to hook both brown to the new single capacitor and the yellow & black to the contactor.My old capacitor had a (c)...
Compressor tries to come on but trip breaker
I have searched th web for a cross-match for a condenser fan motor for a RHEEM model RAKA-036JAS 3.0 Ton A/c Unit To no avail. R.S. R.Ph.
I noticed my condenser motor does not come on when I turn on my air conditioner. Is this something I can fix.
View more questions Search
|
