Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Closet flange
 [ 1 Answers ]
 I have to replace an old cast closet flange, what is the easiest way to get the old one out? Thanks, Cabbie 
Closet flange
 [ 6 Answers ]
 Wanting to move the 3inch drain above the floor joists. I have a closet flange that goes into a riser, from the riser it goes into 3"x3"1.5" dwv for the sink. Could I cut the length of the riser so it will be above the floor joists? Or could I go with a closet bend and tie into the sink drain... 
How to replace closet flange
 [ 1 Answers ]
 I am replacing the entire subfloor in an existing bathroom. The reason is that the floor is currently not level. My question has to do with the existing closet flange. I have removed the subfloor, so I have full view of everything under it now. The closet flange is connected to a 3" white PVC... 
Closet flange
 [ 4 Answers ]
 Hello, We did a bathroom renovation on a concrete slab, and we have an occasional water leak from the closet flange. After looking into it I noticed that the closet flange is NOT leveled with the floor, its higher on the back then in the front. I would like to cut the flange level with the... 
Repair/replace pvc closet flange
 [ 4 Answers ]
 
The toilet in the attached apartment needed a new wax ring because of leakage.After the toilet was removed I found a broken pvc closet flange.It was broken where the flange bolt slides in it's slot.It looks like someone glued a 4" closet flange on a stub of 3" pvc that is 3.5" long.The other end of... View more questions Search 
  |