Ask Experts Questions for FREE Help !
Ask
    Hec6703's Avatar
    Hec6703 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jul 8, 2008, 06:31 PM
    Kenmore ceiling fan
    Hi,
    I have a Kenmore ceiling fan that's approx 8 years old and just recently the high setting stopped working, when I turn it on to what should be high it only works at the medium speed, the medium and low settings seem to be fine, but not the high setting. Could someone please give me some advice on what could be wrong with it and how I can fix it?
    Thank you so much!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 8, 2008, 09:39 PM
    Is it a remote fan, or pullchains?
    Hec6703's Avatar
    Hec6703 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jul 9, 2008, 12:18 PM
    It is pullchains.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jul 10, 2008, 09:51 PM
    Probably the capacitor.

    Ceiling fan capactors - troubleshooting and resources - Ceiling Fans N More
    Hec6703's Avatar
    Hec6703 Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jul 11, 2008, 09:58 AM
    Thank you so much - I am going to check it and hopefully fix it! :-)
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #6

    Jul 12, 2008, 05:48 PM
    Let us know if you get it fixed or have further questions.
    Hec6703's Avatar
    Hec6703 Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Jul 13, 2008, 08:05 PM
    Absolutely, thank you again so much! :-)
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #8

    Jul 14, 2008, 05:41 PM
    Any progress?
    Hec6703's Avatar
    Hec6703 Posts: 5, Reputation: 1
    New Member
    		  
    #9

    Jul 15, 2008, 08:20 PM
    Not yet - I haven't had 5 minutes to take it apart, I'm hoping I will be able to get to it this weekend - wish me luck!
    I'll let you know when I have more info!
    Thank you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Ceiling Paint is peeling while painting ceiling. [ 5 Answers ]

While painting the ceiling the wet paint is peeling the old paint in different areas of the ceiling... It has been raining a long period... Could that be it? This is only happening in the bathroom... It did not happen in the kitchen except under the newly installed light fixture... The living room...

Ceiling light on makes ceiling fan turn off [ 6 Answers ]

I installed 2 ceiling fans yesterday in two separate and am having the same problem with both. Before I removed the old fans I disconnected 1 wire at a time from the ceiling to see what stopped working. So I think one wire is the neutral and made both light and fan stop working, 1 wire was for...

Water mark with mold on ceiling of 1st floor ceiling [ 4 Answers ]

Hello, I've just noticed a fairly large water mark with mold in the center located on the ceiling of a downstairs closet - I believe the closet sits below an upstairs shower. I'm a new home owner and would appreciate your advice on what sort of questions I need to ask a plumber to resolve...

Hanging ceiling fan from vaulted ceiling peak [ 2 Answers ]

Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this?

View more questions Search