Ask Experts Questions for FREE Help !
Ask
    bertie6405's Avatar
    bertie6405 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2008, 05:46 PM
    Can I change a Hunter thermostat with another thermostat?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jul 13, 2008, 06:28 PM
    <Moved to it's own thread>

    No, you can use other brands.

    What is important is the colors of the wires and the terminals used.

    Some tstats need a common wire for power.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Jul 13, 2008, 10:06 PM
    Getting rid of a hunter tstat would be the best thing you ever did, for your home,I`m sure it would thank you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Hunter Thermostat [ 6 Answers ]

Just got a Hunter Thermostat my old one s wires are R,G,Y,W,B. the new one is G,RC,RH,Y/O,W/B,Y1. How do you wire this one I wired it like the instruction and AC works but NO Heat?? Help

Hunter 44155C Thermostat [ 1 Answers ]

New hunter 44155C thermostat these are my ports to connect to: Rh- 24 volt Rc- 24 volt cool g- Fan y/o- air conditioning compressor w/b- heating or reverse valve operation in heat mode. y1- heat pump compressor These are my wires

Hunter thermostat wirirng [ 1 Answers ]

I'm trying to change my old Honeywell thermostat (which looks like T8400C) for programmable Hunter (model 44155C). Old one was connected to Hail Quiet Comfort II two stage gas furnace (on the second floor) and air conditioner (outside of the house). It has 6 wires connected to Honeywell: G (green),...

Need Help with Hunter Thermostat Please [ 4 Answers ]

I have a Payne PF1MNC hvac, and just replaced my White Rodgers thermostat (It wasn't blowing hot air or kicking in in Auto mode) with a Hunter 44155C. There were 4 wires attached: G to G R to Rh (with jumper) Y to Y1 W to W And an unattached B I attached them the same to the Hunter:

View more questions Search