Ask Experts Questions for FREE Help !
Ask
    Ritas_Dad's Avatar
    Ritas_Dad Posts: 2, Reputation: 1
    New Member
     
    #1

    May 10, 2008, 09:45 AM
    Furnace exhaust is killing bushes. Any thoughts?
    We installed a high efficiency furnace several years ago and were told that the exhaust would not harm plants or bushes. Our shrubs in the surrounding area are slowly dying off. Portions of the evergreens have died but this year we totally lost the rhodadendron leaving the unsightly exhaust pipes exposed. Does anyone know of a shrub that will thrive under these conditions?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    May 10, 2008, 10:09 PM
    Although this is not an answer to your question, but it a more attractive venting option.

    See the pictures of the "termination kit" and the "concentric vent" on this page:

    Desco Energy

    Them elbows and pieces of pipe are definitely unattractive and the above contain both intake and exhaust.

    Any possibility of re-routing the exhaust/intkge to a better location.
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
     
    #3

    May 10, 2008, 10:23 PM
    I am wondering if there could be another reason why the shrubs are dying. How far away from the vent pipe are the shrubs dying? How long ago were the shrubs and bushes planted? Maybe there is something else going on that could be coincidental.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    May 11, 2008, 12:37 PM
    We recently learned that leaking gas lines can cause plants to die. Look for any pattern along the gas pipe route if nearby.
    lawnman14's Avatar
    lawnman14 Posts: 37, Reputation: 0
    Junior Member
     
    #5

    May 12, 2008, 09:48 AM
    I am in the heating and cooling trade and the reason for the plants to die is because the exhaust pipe is probably pointing down which will drie up the soil that they are in. Make sure that the exhaust pipe is pointing up and not down. If not cut the pipe right up against the fitting and prime and glue a PVC 90 pointing up, use PVC because it is a high efficienty furnace.
    Ritas_Dad's Avatar
    Ritas_Dad Posts: 2, Reputation: 1
    New Member
     
    #6

    Jul 6, 2008, 09:04 AM
    Thanks for these responses. The bushes are all well established... 15+ years old. The vent is pointing upwards and the bushes have actually started dying off in in sections around the exhaust pipe so there is acutally green on the far side of some of the bushes and dry and brown on the side near the pipe. There are three differenty types of bushes in the area and we are having the same problem with all of them. We had the vent relocated a few years ago due to some construction we were doing and the same thing happened in both locations. The gas lines are in a different location altogether so I don't think that is the problem. I don't think there is much we can do short of spray painting the bushes green and pretending they are healthy!
    NaturalGasMan's Avatar
    NaturalGasMan Posts: 14, Reputation: 1
    New Member
     
    #7

    Jul 6, 2008, 10:47 PM
    I would agree with Keep it simple stupid, I would call your local gas supplier and have them send out a leakage inspector. I work for a gas utility and have never heard of combustion gases killing plants, in fact some greenhouses remove there venting in winter to help heat the spaces. Natural gas underground will kill grasses and plants. It is a way that we locate leaks when suspected. It can be a very dangerous situation depending on the size of the leak...
    love_0004's Avatar
    love_0004 Posts: 2, Reputation: 1
    New Member
     
    #8

    Aug 1, 2008, 07:38 AM
    Quote Originally Posted by Ritas_Dad
    We installed a high efficiency furnace several years ago and were told that the exhaust would not harm plants or bushes. Our shrubs in the surrounding area are slowly dying off. Portions of the evergreens have died but this year we totally lost the rhodadendron leaving the unsightly exhaust pipes exposed. Does anyone know of a shrub that will thrive under these conditions?
    I had the same problem I put a 90 degree elbow on the exhaust pipe and put a small extension on that so far it seem's to be working

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane smell in furnace exhaust [ 3 Answers ]

I have a strong propane smell in furnace exhaust. I do not smell it in the house, and can only smell it when the furnace is running and I am outside. Also, there seems to be a gurgling sound that I did not notice previously. Propane company said first there's probably not a problem and then...

Updating an exhaust pipe on my furnace [ 5 Answers ]

I'm updating an exhaust pipe on my furnace. Currently I have 4" steel exhaust pipe coming from my DUKANE MPGA075B3 (75.000 BTUs) (AFUE% = 80%) I would like to update it to "Thermoplastic Pipe" because it require a 0 clearance to combustion material. Few questions: Do I have to use a 4" pipe or I...

Furnace exhaust color [ 1 Answers ]

Hello - I have gas furnace in my home - a Lennox 75,000 80% furnace G23 q2/3-75 - with a 5"x 25' chimney liner that was installed in 2000. I keep the area around my funace very clean and I open up and clean it out regularly. Yesterday, my neighbor stopped by to tell me that they noticed...

Using a furnace blower as exhaust fan [ 1 Answers ]

I am trying to get the wiring for the blower I have. :confused: One side I have a black, white and red wire which goes to the plug. The other set of wires I have red, white, blue, yellow, and black. What goes with what? Please help me.


View more questions Search