Ask Experts Questions for FREE Help !
Ask
    cypressprings's Avatar
    cypressprings Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 15, 2008, 06:55 PM
    Installing deck spring on 36' mtd rider
    How to install the deck spring on a 36 inch mtd deck
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 16, 2008, 04:11 PM
    I use a piece of pull rope and loop it through the end of the spring to stretch the spring to the hook up place.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Spring Gun [ 2 Answers ]

A spring-loaded toy gun is used to shoot a ball of mass m= 1.50\; \rm{kg} straight up in the air, as shown in the figure. View Figure The spring has spring constant k = 667\;\rm{N/m}. If the spring is compressed a distance of 25.0 centimeters from its equilibrium position y=0 and then released,...

I need to replace my deck belt on my troybilt 17hr. 42' deck belt diagram [ 4 Answers ]

I need to replace my deck belt on troybilt 17hr. 42' riding lawnmover. Be nice to have a diagram

How to keep second floor deck from dripping water onto first floor deck [ 5 Answers ]

We are planning to build a second floor deck over an existing deck. Will be 16 x 12 when finished. My question is this. We don't want the upper deck to allow water to drip onto the lower deck when raining. How can this be prevented? I want to use 5/4 decking on top, but don't see how we can do that...

Installing a spring timer [ 3 Answers ]

Hi, In my bathroom, I have a toggle switch that controls a ventilation fan (not the light on the vent) and a light over the shower. I wanted to replace this switch with a timer switch. When I look at the wiring, I see all of the white wire bundled together. 2 black wires are attached to...

View more questions Search