Ask Experts Questions for FREE Help !
Ask
    short31's Avatar
    short31 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2008, 03:44 PM
    a/c cycling too often
    Just installd a honeywell thermostat (rth230b) it run until it reaches the set temp. then it shut off then it comes right back on within seconds. Please give some advice on what could be problem. Thanks
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 10, 2008, 04:03 PM
    Sounds like anticipater needs adjusting,, just maybe,, not for sure your tstat has one
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #3

    Jun 10, 2008, 04:13 PM
    In you manuel or book it should have something about how to set for hourly cycling,, look at page 3
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jun 10, 2008, 10:01 PM
    See page 3 number 4 to set the cooling cycles per hour.


    http://customer.honeywell.com/techli...0s/69-1800.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Well pauses before cycling on. [ 5 Answers ]

I have a well its 6 years old. It has always pumped a little sand from the beginning. I have installed a tornado filter to keep sand out of the house. Now in the past couple months while using water the pump will go to recycle when the pressure valve flips to make the connection to start the pump...

Flame cycling! [ 1 Answers ]

I have a Temstar NUGK100DH08 gas HVAC. The unit lights then flame dies down, re-ignights and continues this. Temperature set at 72*. Flame doesn't appear to be rolling out. Exhaust motor is running O.K. and no vacume leak. Does anyone know what's wrong. Thks Mike!

Icemaker not cycling. [ 2 Answers ]

Ice is frozen in tray and "arm" is down/on. Maker is not cycling. Simple solution?

Furnace cycling [ 2 Answers ]

My newer energy efficient furnace cycles every 10 minutes about, I have a new one story home that is very well insulated.

Fan Keeps Cycling [ 1 Answers ]

I have a Carrier central A/C and a Propane FAG furnace in my basement. The problem is that after the A/C or furnace has shut off, the fans continue to cycle off and on just as if the A/C or furnace was still running.:mad: Sometimes the fans (there is 2 of them, I believe) run continuously and...

View more questions Search