Ask Experts Questions for FREE Help !
Ask
    larywells's Avatar
    larywells Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2008, 08:25 PM
    I have a yard Man (riding mower)-model 13a16714g401-solenoid clicks when attempting to start,Put on new solenoid and same results.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Jun 6, 2008, 08:47 PM
    Check the kill wire that is the small black wire on the coil. Disconnect it, then see if you have spark.
    Northern Mike's Avatar
    Northern Mike Posts: 44, Reputation: 4
    Junior Member
    		  
    #3

    Jun 7, 2008, 01:20 AM
    You may have a bad battery. Mine did the same yesterday. Battery was charged but did not have the cranking power needed and my solenoid just clicked. Put in new battery and away it went. Hope this helps.
    Mike
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Solenoid [ 1 Answers ]

How To Test A Solenoid For A Lawn Tractor

John Deere L110 Clicking sound on start - new solenoid, still clicking! [ 1 Answers ]

Hi all, I cut my lawn, engine was running for about 2 hours. Stopped at neighbors house, cold beer, go to restart, just a clicking sound. Thought battery was dead, did a quick check, good voltage, hooked it up to a charger, good amps. Still clicking. I figure it's the solenoid, picked one up...

B & S Solenoid relay [ 2 Answers ]

Can you assist me with testing procedures for a 12v, B & S Vanguard motor, relay solenoid. Can it be tested when removed from the mower? speedy2460

Solenoid [ 2 Answers ]

Can anyone tell me how to test the soleniod for the reversing valve on a heat pump? :confused:

View more questions Search