Ask Experts Questions for FREE Help !
Ask
    Laurie Michelle's Avatar
    Laurie Michelle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2008, 12:27 PM
    Where do we start?
    Hi, we are looking at having my grandmothers home put in my Uncle's name and wondering how to go about this? She is suffering from dementia and we were told we could get all of her children together to sign a paper stating they all agree that he be the sole owner of the home and that all land and home be placed in his name... we just aren't sure where to start. Please help as we would like to start on this soon. Thanks.
    LisaB4657's Avatar
    LisaB4657 Posts: 3,662, Reputation: 534
    Expert
    		  
    #2

    May 29, 2008, 01:50 PM
    Your best bet is to contact a real estate attorney or title insurance company and have them handle this.
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #3

    May 29, 2008, 02:44 PM
    Whose name is on the deed now? Only that person can sign the deed over unless there is a power of attorney or if they are that persons guardian.

    Since you are going to "sell" the property of another, you will want a real estate attorney
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where do I start looking for grants to start up construction business in Mn. [ 3 Answers ]

Hello,I am John and I would appreciate any help I could get on finding some grants or low interest loans for starting a concrete contracting business.I have searched some sites but most want money for a kit.My credit is not very good and I am just trying to start a small construction business.I am...

Can't start my Poulan chainsaw. Start rope too hard to pull. [ 1 Answers ]

Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.

Tractor won't start with key - but I can jump starter to start [ 2 Answers ]

I bought a used Ford 1210 compact tractor and it will not start with the key. I replaced the switch and still no luck. Tested the safety switch & wire that goes to the starter and both are in good order (verified with ohm meter). When I try to start with the key, the lights dim some so I can see...

91 honda crx no start or rough start, puzzled HELP! [ 5 Answers ]

Ok, I'm running a SOHC ZC motor. I have good compressions across all pistons at 135psi and holding a piece. I have checked the timing and it is correct. I have checked the fuel pressure and it is OK. I haven't been able to figure out how to lean the fuel out though, but anyway, it starts up and...

View more questions Search