Ask Experts Questions for FREE Help !
Ask
    senators's Avatar
    senators Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2008, 10:04 PM
    Windows 2003 r2 server
    Dear All,

    I need a small help, I have windows 2003 r2 server installed and updated, whenever I plug in pen drive in the usb port the server gets hanged, there is no other solution rather than restart, since it a uprunning server and many users connected to it to access ERP installed in server it is not recommended to restart, suggest
    chuckhole's Avatar
    chuckhole Posts: 850, Reputation: 45
    Senior Member
    		  
    #2

    May 29, 2008, 08:11 AM
    Is the USB port connected to a USB hub of some kind? If so, do not use the USB hub. Connect directly to a motherboard USB port.

    Is the USB pen drive a dongle that is used for allowing software access? If it is just for data transfer, then put the drive in your computer and share it out so that the server can access the data on it. You may have a hardware issue with the USB port on the server or there may be a USB hardware version conflict (1.x to 2.0). You may not have USB legacy support enabled on the motherboard if this is required for older memory sticks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Windows 2003 server hangs frequently [ 2 Answers ]

Hello My windows server hangs frequently why And if it hangs out all 50 windows xp clients also stops Responding why?? //

Downgrade windows 2003 server to windows 2000 server procedure [ 1 Answers ]

Hi.. Recently I planned to buy a server with windows 2k server OS. Unfortunately I was told that win 2k server will be no longer in support at 2007.:confused: What happen is that the application I need to run is under win 2k server only, can anyone advise me how to perform the downgrade...

Windows Server 2003 Share Access [ 9 Answers ]

I am in the process of upgrading a peer to peer windows xp network environment to a windows server 2003 domain. My clients have windows xp pro with a third party program installed for point of sale and accounts receivable management. The program requires access to a network share folder housing the...

Setting up Windows Server 2003 [ 6 Answers ]

Okay I have a few questions. First is my Cable ISP gives me a Dynamic IP Address. But I would like to set up a home net work with Windows 2003 server. I would like to physically set it up this way. Modem to Router with DHCP turned off on the router, then router to server with DHCP, then...

View more questions Search