Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Windows (https://www.askmehelpdesk.com/forumdisplay.php?f=237)
-   -   Windows 2003 r2 server (https://www.askmehelpdesk.com/showthread.php?t=196196)

  • Mar 18, 2008, 10:04 PM
    senators
    Windows 2003 r2 server
    Dear All,

    I need a small help, I have windows 2003 r2 server installed and updated, whenever I plug in pen drive in the usb port the server gets hanged, there is no other solution rather than restart, since it a uprunning server and many users connected to it to access ERP installed in server it is not recommended to restart, suggest
  • May 29, 2008, 08:11 AM
    chuckhole
    Is the USB port connected to a USB hub of some kind? If so, do not use the USB hub. Connect directly to a motherboard USB port.

    Is the USB pen drive a dongle that is used for allowing software access? If it is just for data transfer, then put the drive in your computer and share it out so that the server can access the data on it. You may have a hardware issue with the USB port on the server or there may be a USB hardware version conflict (1.x to 2.0). You may not have USB legacy support enabled on the motherboard if this is required for older memory sticks.

  • All times are GMT -7. The time now is 07:12 AM.