 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
First check the breaker box for a thrown breaker. Next open up the top inspection plate and check the red reset button on the top thermostat. If everything's OK there and you have power to the heater click on back. But first make sure the heater has power going to it. Good luck and let me know, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Which one saves me money; the tankless water heater or conventional tank water heater? :confused:
Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...
What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...
Hello, We just had a new water heater installed yesterday and the water pressure seems to be reduced (probably 85-90%) of the prior level, through out the entire house. Our old water heater started to leak yesterday AM, had the new one installed that afternoon (40 gallon, 9 year wty, gas: GE...
View more questions Search
|
