Removal of ceiling fan

ceilingfanrepair Posts: 5,733, Reputation: 109

Uber Member

#21

May 19, 2008, 07:27 PM

I'm late-- if you removed all three nuts closest to the ceiling, it should come off. The suggestion of making sure the washers were also removed was a good one.

Looks like a Moss fan, very good quality older fan.

Add your answer here.

Check out some similar questions!

Hampton Bay ceiling fan removal [ 13 Answers ]

Hi, We have a Hampton Bay ceiling fan in our house (installed before we moved in). We want to move it to another room and are having trouble dismounting it From it's current location. We lowered the disk that contains the two light Bulb sockets and see a nut on a hollow shaft with wires through...

Removal of ceiling fan [ 2 Answers ]

How do I remove a ceiling fan? Thanks... Bill D

Ceiling fan removal [ 2 Answers ]

I have a Hampton Bay Ceiling fan I'm trying to remove from the ceiling. I have removed the lights and exposed the basket with the pull chain switches, I have disconnected all of it. Their was a 7/8th nut holding it underneath in the center. I removed that and every other nut and screw in site. I...

Ceiling texturing after popcorn removal [ 2 Answers ]

Hi, We're renovating a condo built in the 70's and have chosen to remove the popcorn ceiling. We've just about finished the removal and will be sanding, repairing, and priming. We're struggling with whether to texture the ceiling before painting or not. Looks like someone has come into the condo...

Ceiling Fan - Light kit removal [ 1 Answers ]

I have a Hampton Bay ceiling fan - model CC 52HD. It currently has a light kit attached to it and I'd like to remove it, but need the "cap" that should fit over where the light kit currently is attached. Anyone know where I can find one of these? Are they standard?