Ask Experts Questions for FREE Help !
Ask
    lawelovey's Avatar
    lawelovey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2008, 10:15 PM
    Monitor says "no signal"
    My computer goes on all right, I see lights on the boards are on. While it is running there is a beeping sound that sounds off intermittently. My Monitor shows "no signal" then goes black.I should mention that it did happen before,:confused: off and on. Thanks for any help!
    ymeski56's Avatar
    ymeski56 Posts: 5, Reputation: 1
    New Member
    		  
    #2

    May 19, 2008, 05:51 AM
    the beeps or sequences of beep (like morris code) is the motherboard informing you events successful and failures occurred while booting. Definition of code sequences are specific to its motherboard.They are listed and defined in your manual that came w/ your computer.Or go to system info /motherboard info Note manufacturer + model # go to web site or computers makers w/s. vid card error my guess. Make sure vid card is fully and evenly inserted W/COMPUTER OFF! check display connect to vid card.reboot good luck Note:More info=faster/ Better ANSWERS i.e.. 486,P3,Dell Dimension w/on board video & sound & last thing I remember doing before by problem occurred I moved system to another location. Something like that! Anyway,Good luck , hope this help you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

"No Signal" on Monitor; PC power on but not booting up [ 5 Answers ]

I have a PC I built about 6 months ago that I've never had any problems with. Now when I turn it on I get "no signal" on my monitor. The problem is not the monitor though... the PC does not give any "beeps" or show signs of booting up... though the lights are on, all components seem to be...

Monitor starts up until after windows xp loading then says "no Signal" [ 6 Answers ]

Hi, last night my friend came round with his laptop an we watched a film using my monitor. I turned off my computer, unplugged the monitor an plugged it into his laptop, we watched the film fine, he went home. Next day in the morning I went to turn my comuter on, it loaded up until just after the...

VGA Monitor - "No Signal" w/New Mobo, CPU & Ram [ 2 Answers ]

The Preamble: My old computer: ASRock K7VM2 mobo with 2GB DDR, AMD 2400+, stock CPU fan and heatsink. I was installing a PCI wireless adapter into this mobo as per the adapter's manual. After installing the software I was supposed to turn off the computer and install the PCI card, then...

Monitor flashes "no signal" when computer is turned on [ 3 Answers ]

I installed a new power supply and now my monitor will not come on. It quickly flashes, "no signal" once then nothing. Everything worked fine until the power supply went out.

Computer is on, But Monitor display "No signal" [ 5 Answers ]

I am running on Window 2000 Professional OS, When I not touch the computer for 10 or 20 minutes(the time is not fixed), the monitor goes off and display "no signal". Then I cannot do anything except turn the computer off by press the computer power button. When I turn on the computer again,...

View more questions Search