Ask Experts Questions for FREE Help !
Ask
    playbyplay2's Avatar
    playbyplay2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2008, 01:24 PM
    Distance and time graph
    i have a distance time graph. the total distancein meters is 100. the total time is 60 seconds. the question is what was the bikes average speed over the 60 seconds shown.
    Rerepete's Avatar
    Rerepete Posts: 17, Reputation: -1
    New Member
    		  
    #2

    May 14, 2008, 01:37 PM
    To calculate the average speed, take the total distance and divide by total time. In this case 100m/60s, or 1.7 m/s.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Shortest distance from graph of 5+3x-2x^2 to point 2,1 [ 2 Answers ]

I understand how to find the equation of a tangent and a normal line at a given point by using the first derivative, and I know how to find the distance from x,y to 2,1 using the distance formula, but I don't see how to put it together. The book says: Use the distance formula ^2 = + ^2 and...

Rate - time - distance problem [ 4 Answers ]

A state police officer is chasing a car he believes is speeding. The officer is traveling at 70mph to try and catch up with the car. But he can't say later that the other car was going 70mph because the driver could ask, "If we were going the same speed, how did you catch up? Obviously I was going...

Rate-Time-Distance problem.. help! [ 4 Answers ]

I don't get his "Rate-Time-Distance" Problem given to me... it's confusing to me!:confused: :eek: HELP!:eek: Can you show me how to do it?? :D Here's the problem... :) At. 7:00 am Mr. Van starts jogging at 6 mi/h. At 7:10 am you start after him along the same path. How fast must you...

For a graph [ 1 Answers ]

I have to find the slope-intercept of an equation... 1. slope=2 passes through (1,5)... 2. passes through (-1,-5) and (3,2) 3. passes through (0,3) and is perpendicular to a line whose equation is y-7x=4?

Critical Distance is Pipe Length or Literal Distance? [ 2 Answers ]

Is critical distance measurement based on the literal distance from a trap to the vent stack, or the total length pipe from the trap to the vent? In other words, if the trap is 4 feet from the vent, but the drain pipe from the trap to the branch that has the vent connected to it is 10 feet, is the...

View more questions Search