Ask Experts Questions for FREE Help !
Ask
    maker59's Avatar
    maker59 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 27, 2008, 04:45 AM
    No start, no spark
    Neighbors Sears riding mower would not restart after shutting it off. Good battery, new plugs new fuel filter. Took top cover off and checked pick up. Noticed that the lead on the coil pick up is worn low. Should if be making contact with the fly wheel to make contact with the magnetic pick-up for continuous spark?
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Apr 28, 2008, 04:17 PM
    No, the coil is usually about the thickness of a business card off the MAGNETS.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Car Won't Start - No Spark [ 13 Answers ]

The car is a 1994 Toyota Camry 4cyl automatic. Recently replaced blown head gasket. Car started after repair but ran for only 5 seconds before it died and wouldn't start again. After checking the timing belt and cam positions I cranked the engine and performed a spark test which produced a...

92 Honda Accord LX won't start,no spark [ 4 Answers ]

My 92 Honda Accord won't start, coil has no spark.the starter cranks fast, I replace the coil, the main relay switch and the ECU module inside the distributer.I used a multimeter to check the battery voltage (12 volts) but the highest voltage going in to the coil is only 1.4 volts. I could use some...

Craftsman 14.5 briggs won't start no spark [ 7 Answers ]

I just bought a used craftsman mower, dark green model 917 I think, the battery was dead but the guy had charged it before I came and bought it, it started right up sounded good I bought it, got it home, charged it a little, started right up, tried out some of the attachments that came with it....

96 accord won't start no spark [ 1 Answers ]

96honda accord turns over but won't start I have replaced plugs distributor cap and rotor button. Also the ignition coil. I am getting fuel just no spark. Can someone pleas help me. Car was fine when I parked now won't start.

Got spark STILL won't start [ 1 Answers ]

I have a cutters edge(jonsered) 2 cycle chain saw, I replaced the ignition module and checked for spark, very weak spark and still no start. I took the module off and sanded the mounting surface where the module bolts to and gets a ground, after reinstalling the module I got good spark but it...

View more questions Search