Ask Experts Questions for FREE Help !
Ask
    bill_holler's Avatar
    bill_holler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2008, 02:25 PM
    PVC Pipes
    How do I disconnect PVC pipes that have been glued?
    honesthelmer's Avatar
    honesthelmer Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Apr 20, 2008, 03:54 PM
    The pipe must be cut. If it is too short you must splice in a long enough part. If that won't do it you must keep going back and cut and replace.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #3

    Apr 20, 2008, 05:16 PM
    There are reamers for the fittings, when you absolutely have to.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Air in pipes [ 4 Answers ]

Air in home plumbing water lines making loud humming sound in pipes ? Were on city water, been making humming sounds for weeks, can't use water at night to loud wakes everyone up,

Frozen pipes - detecting burst pipes [ 1 Answers ]

Cold side of the kitchen faucet was frozen this a.m. Trickle returned this evening, followed by an immediate drop in hot faucet pressure - then some brownish water - the brownish water lasted 20 seconds - but the pressure is still low 1/3 pressure now and can get both some hot and some cold Have...

Shower Pipes [ 1 Answers ]

Does the pipe leading from the faucet vertical up to the shower head have to be straight? In other words, does it matter if I put a small "S" joint in the pipe? Thanks

Old Pipes [ 4 Answers ]

I'm redoing a bathroom in a 1960's vintage home. Wanted to replace the rusted pipes draining from the sink (in the wall) with pvc. Should I screw out the pipe or just pull. Do I have to knock out the wall and get a clear view or can I do the job without wall damage. When I install the PVC do I...

View more questions Search