Search:
Type: Posts; User: shablue55
Search:
Search took 0.01 seconds.
-
I have an awning type window in my house and the window has lost all of the vacuum between the glass. How do I take the pane of glass out of the window so I can replace I. The frame is plastic.
-
Thanks to both of you for your answers.
-
What does the cap on top of the chimney really do besides not to let rain and snow in.
-
Thank you for your answer I will try this and see what happens.
-
I have an Americana snowblower and found a manual for it on internet and it tells me to use a 30" belt for the auger. So I got one put it on and the belt is so tight that the auger runs all the time....
-
I have a shower in my basement which I am replacing. Have got the old one out and some of the paper of the sheetrock came off with the sides of the shower. Is it OK to prime and paint before I apply...
-
Balance is fine. I am going to make an appt for an alignment can't hurt.
-
I brought my air compressor in blew all the dust out and works fine so far thanks for your help.
-
I own a 08 Ranger 4x4 and am noticing the inside of the tires are cupping, would a wheel alignment fix this problem. Everything on the front end is tight.
-
Thanks for your answer T-TOP but it is only the one burner beside the igniter that lights up, would it still be dirty burners as I vacuumed the out yesterday and did not do any good, will have to...
-
I hate to say it but the furnace was new roughly 10 years ago and lack of management on my part I have not had the furnace or the ductwork cleaned.
-
Just wondering if anybody else has the same problem with there mid efficient Rheem furnace only lighting up the burner beside the igniter instead of all three at the same time.
-
On my furnace my inducer draft motor starts up runs for 30 seconds then the ignitor lights up I hear a click the first burner lights up but not the other 2, it shuts down a few seconds later the...
-
I have a rheem furnace. The problem I am having is the inducer motor comes on runs for about 30 seconds then the igniter comes on then the gas kicks in but only the burner beside the igniter lights...
-
There are no screws that hold the ceiling up, but I think you are right.
-
On my furnace my inducer draft motor starts up runs for 30 seconds then the ignitor lights up I hear a click the first burner lights up but not the other 2, it shuts down a few seconds later the...
-
I am not sure, what should they be?
-
My son has an older mobile home and has to replace the ceiling in the bathroom. There is no air space above the ceiling, but will plug with pink insulation. We are taking the fan down and putting it...
-
Thank you already out but found some wet proboard so will have to replace all of that and then continue on.
-
Already done but found out the proboard has to come off as there was a leak under the toilet.
-
The rest of the bathroom is going to be painted gyproc.
-
What would you use acrylic tub surround or tile.
-
It is just an ordinary steel tub and it doesn't look to be too heavy.
-
WE ARE RENOVATING OUR BATHROOM UPSTAIRS AND ARE WANTING TO PUT A NEW WHITE TUB IN PLACE OF THE EXISTING ONE. The bathroom will have toilet and vanity taken out. How far up from the tub do I have to...
-
My 06 Escape is going through so much gas, just under 1/4 tank in about 40 miles. Would this have anything to do with the injector system or what other things should I look at? It has a small 3litre...
-
Just got my car out of the body shop and now my command start does not work. They had the hood off and I noticed the plunger that operates the command start on the inside of the fender was loose so I...
-
In my mobile home in the bathroom up in the attic the insulation has fallen off the inside of the roof. It is a aluminum roof. Is there a insulation spray I can spray on the inside of roof, then fill...
-
About 3 days after I eat a granola bar with honey I can feel the start of a cold. Could I be allergic to honey?
-
I am trying to hook up front and rear and center speakers and subwoofer on to my PC. I have the cables plugged into the subwoofer like it says to do. Have gone in and changed my computer to 5.1,...
-
My 4x4 4H does not work but 2H and 4L work. This is on a 2008 Ford Ranger. I was told to take the electric motor that is hooked onto the transfer case and see if that is the problem but have not done...
-
Acrylic latex vs just latex
-
To all those professional painters out there , what kind of paint do you prefer to use while using latex paint? I am painting my kitchen and was wondering what brand of paint to use?
-
We have fluorescent lighting in the kitchen now. Which would be cheaper to run?
-
We have had wallpaper on part of a kitchen wall for close to 25 years and would like to remove it but unsure of what to use. Any help out there?
-
My son lives in an old mobile trailer with a steel oval roof. There used to be insulation glued to the inside of the roof but has come off and when it gets cold over night and warm the next the water...
-
Are there any breads out there to eat if you are trying to loose weight?
-
Just recently heard of Garrison furnace filters. Do they compare to 3M filters? I see that the only MERV rating is 8. Has anybody used them?
-
I have a gas fan forced furnace, and the default setting on the stat is C-3, can I change it to C-0 to keep the furnace from cycling too much. From what my book stat book says C-3 it cycles 5 times...
-
Sorry I had the wrong title down it should have read outlook express. How to find and delete emails from this site.
-
The old internet explorer was a dream to work for my wife, then along came a new version only to find out that she does not know how me included how th delete the emails, and when she clicks on mail...
-
I got my printer working.
-
I have a Epson Stylus Photo R280 printer, and recently installed new ink cartridges, when I went to print something off it printed every color, red orange yellow and very hard to see what is was I...
-
Was wondering why I cannot get my Epson R280 to print black only, as all my colors are empty?
-
So ScottGem you say to use HP only. Do you know how many ink cartridges there are, as with me it just for home use and I do not do a lot of printing.
-
Which thermostats are better Honeywell digital or White Rodgers digital and reasons. Both are to be programmable.
-
Is it possible to paint Latex paint over oil base paint. It has been quite a few years since they were painted. Should a person sand the walls first then primer then paint?
-
Thank you HVAC 1000 for your info.
-
Should a person take this flame sensor off and use steel wool to clean it, or what does the flame sensor do? Mine is on a electronic Rheem furnace.
-
How to get wall paper off walls? It has been on for quite some time and would like to take it off so I can paint, also if there is oil based paint on now can I use latex over top and will I run into...
-
Does anybody know what can a person put on the feet of chairs so when they are moved the feet don't take the wax off, right now there is white plastic gliders which came with the chairs.
|