I replaced T&P valve but I now have no hot water
We are selling our home to which an inspector came by the other day, in the process of checking the t&P valve it has since been stuck in the open position I realize after reading the label that it should have been replaced every 3 years, the unit is 8.5 years old.
So after about 36 hours of a slight leak, I left for work today and my wife calls me and told me we have no hot water, so I come home unplug power from unit, drain unit, take out old valve, off to ferguson supply, and then replace unit only to find out I still have no hot water.
Could the constant draining of valve have caused something else to have failed, Last night we had hot water so what ever was the cause happened overnight.
I have opened up cover of unit, and pressed the red button, however after some internet searching I think I need to go and unplug unit again to try resetting the red button.
Please help I have to have this repaired by Monday,
PS first time poster.
Jason:confused: :confused: