The Whirlpool washer suddenly stopped and appears to have lost all power to it. The power supply has been verified. This occurred when it was about to start draining from full capacity. Bought in 2004.
Model: SAWS800MQO

Here are the manuals: https://dl.dropboxusercontent.com/u/...%20Washers.zip
https://dl.dropboxusercontent.com/u/...c%20washer.pdf
https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
You will need a meter to diagnose what is wrong. One thing that will stop it dead like that is a stopped up water valve. Remove the hoses from the back of the machine and pull out the screens from the inlets on back of machine and clean them with an old toothbrush. Check both ends of the hoses for screens, too. Once unstopped it will run normally.