Here I have a situation where owner of air conditioning business didn't complete the installation.The work was shabby with lots of foil tape.The louver or fins on the back of the unit (carrier infinity 48Xl-N model) are partially blocked with foil taped across it along the top lip of the trunk shield which poorly fits.I believe if left in place like that,it will affect performance of the system? Second, the trunk puddles water top of it,not sloped so it can drain.There is about half inch 5/8 pool of water.I don't know much about air conditioners but pretty sure you don't block the louvers? Never have I seen a shoddy ac/heat install like this.Unfortunately,
He's been paid and probably won't return to run the unit for the 1st time startup.I'll also face warranty issue if I hire someone else to finish as the unit was recently registered with the installer's name on carrier's website? Can I do this myself or will that likely void warranty? How does one light pilot on the infinity & set t'stat?
I purchased this system online maybe that's why I got s****y installation.
