I'm planning on re-tiling our shower. I'll be using 4X4 tiles on the shower floor. My question is, what do you use to cut the tile around the drain, hole-saw? Thank you. Tim

Hole saw or carefully used nippers. Use your tile saw to cut the largest end and then use nippers.

A special hole saw made for ceramic Vacuum Brazed Diamond Core Bit for glass, ceramic and porcelain 2"

Tell us more about these 4x4 tiles. Are they porcelain tiles or basic ceramic 4 1/4 x 4 1/4" like those sometimes used on walls? Do you have names or other info?

Jaz

All of the above or use a:

Roto-zip tool with tile cutting bit

Angle grinder with a diamond blade

Dremel tool with a diamond/carbide blade

Mark