I am having to reset my furnace switch for the heater to continue to work. I will wake up and it is freezing in the house and I check the temp. and it is below the preset temp. If you try to turn it on manually on the thermostat, it won't work until I go downstairs to the furnace and flip the switch off and on a few times until I hear it kick on. Then it will be fine until it stops working again and the cycle repeats. It is getting worse now because before, I had to do this only every few days, now it is most everyday, no matter the time of day. It was doing this with the air conditioner this past summer as well, so I know it is not just the heater. It is a Lennox elite series that is the original since we built the house 16 yrs. Ago. It has never had any problems before and has never been serviced for any reason. I change the filters regularly, so this is not the problem. It also seems harder to get it to kick back on now. I also have learned that if I turn the fan on switch on on the thermostat and then go flip the switch, you can hear it kick on easier and then when it does, I go back up and turn the fan off and put it back to auto. With winter coming, I am concerned. Any ideas besides the obvious of calling a proffessional to look at it? I just hate to do that if it is somehting I can do myself and save on $. Thanks.