When removing carb. For cleaning I didn't note the locations of the two linkage rods.I had to wait for two weeks for parts to repair carb. Thus really forgetting where linkage goes. Do you have a picture of it ?
|
When removing carb. For cleaning I didn't note the locations of the two linkage rods.I had to wait for two weeks for parts to repair carb. Thus really forgetting where linkage goes. Do you have a picture of it ?
Many times I don't have Manuals, but would think 1 for throttle and 1 for choke, Move choke lever, see what moves, move throttle see what moves, now connect where they go, be sure they rotate the correct direction, may change direction?
This is till you find better help.
Good Luck
What exact model do you have, usually starts with 917.XXXX
Here you go
Quote:
Originally Posted by neverends
Curlyben, where did you get the number, a PM?
The OP reported the post rather than responding.
Not sure what you mean"reported the post", where did you see it?
The OP used the Report Inappropriate Post link (RIP) rather than posting the information as a follow up.
So I've simple reposted it here.
Ahhhhhhh. Thanks, Take Care
| All times are GMT -7. The time now is 07:45 AM. |