Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Construction (https://www.askmehelpdesk.com/forumdisplay.php?f=81)
-   -   Tapcon screws 3/16 by 1" 3/4 (https://www.askmehelpdesk.com/showthread.php?t=594174)

  • Aug 23, 2011, 01:51 PM
    pastor1189
    Tapcon screws 3/16 by 1" 3/4
    When you drill 3/16 hole in the cement block with a hammer drill for the tapcon screw
    Do you drill the entire length of the screw, or just a pilot hole to get it started ?
    I was worried about it gripping?
  • Aug 23, 2011, 01:59 PM
    ballengerb1
    Drill to the depth of the screw or until you are inside the blocks cavity.

    • All times are GMT -7. The time now is 11:41 PM.