Leaking Shower/Bath Faucet. Replaced Stem, Assembly
Hello,
I have leaking in my bath/shower faucet. It is a Danco kit. I believe the original was Bradley-Cole. After removing the stem, my old one had a hole on the end rubber piece. So I was pretty confident replacing it would fix it. After replacing it a pretty hard stream went to completely fixed. Not even a drip was coming out. After about 2 days it has started to have a stream again. It's not a drip, but a fair stream. I shut off water again and removed it. I added some O-Ring lubricant on anything rubber to see if that would help. Not really. I don't see anything to tighten or anything. What should I try next? Could I need to change the spout?