Hi There, I Was Wondering If Anyone Know's How To Fix The Bathroom Mixer Tap. When You Turn It On, ( the hot water tap on the bath ) It Only Turns A Small Amount And The Water Comes Out Ever So Slow.. It HAS Been Doing That For A While now, But Now It Is gettind Bad. Its Very Slow. Can Anyone Help Me I would be very grateful.


Kind Regards
Tisha.

What's the brand name and type,(one handle or two knobs?) Let us know. Tom

Quote:

---

Originally Posted by speedball1

What's the brand name and type,(one handle or two knobs?) Let us know. Tom

---

Hi speedball. Thank for getting back to me.. I don't no the make of the
Taps. But they have two knobs. And it the hot one is the problem . Attachment 2369 but here is a photo. If that OK


Regrads tisha

That's fine Tisha,

Shut the hot water off under the cabinet, remove the handle and open up the faucet. Check and clean the inlet ports on the cartridge if there is one and the seat if a washer type. Now, with the valve still apart, place a pan over the faucet and turn the hot water on for a minute to flush out the supply. If you have a full stream then reassemble and test. Regards, Tom