My toilet flange is too tall from the floor to the top of the flange is 3/4 inch and when I set my toilet it rocks .I want to level the floor to bring it up a little and put tile down but I don't know how far the flange needs to be sticking out

Hi Nanazz..

The answer is a range...

The bottom of the toilet flange needs to sit right on top of the finished floor (best way) or the top of the flange can be flush with the finished floor... either works fine, but both ways require that you secure the closet flange firmly so you can secure the toilet properly.

Mark

So the lip of the flange is 1/2 inch,so I bring the floor leveler to the lip if the fland then I will have it stick out 1/2 inch above my tile . Is that right ?

Does this help

Yes it does thanks so much.Just what I was looking for

Nanazz...

Describe how you plan to do the floor, OK...

What will be under the floor leveler?

How thick will you pour the floor leveler?

Why not install cement board?

Back to you...

Mark

My floor is cement this bathroom is on the bottom floor is only about a 6'x6' My floor isn't level it slopes down to the flange,the flange is broke but I have a repair ring to screw into the floor. I am not sure if I am going to carpet it or tile it .