No gas to carb?

Perform the K-Test on the ECM:

The K-Test: Remove the MAP Sensor connector and turn the ignition switch to ON (Position II). Using a multimeter, check for 5 volts going between the MAP Sensor connector's reference wire (+) and ground. As you look at the connector, this is the socket on the right. Really press the black test lead into a cleaned main ECM ground on the thermostat housing. If the voltage is low, it’s probably indicating ECM failure. Most failed ECMs will record a fraction of a volt. To me, the K-Test is simple, elegant, and accurate.

You don't know what you're talking about!! They're the same, bud.

How about we just throw this link at 'em.
https://www.askmehelpdesk.com/cars-t...le-303903.html
An electronic control unit for a carbureted vehicle? I'd REALLY like to see this poster read the link and get back to us.

People are their own worst enemies. Try and help someone and look what happens. Go figure. He previously tagged on to someone elses' posting, kitch428, that had a 1990 Honda Civic Hatchback.

The poster is embarrassed and not responding back because... he forgot to put gas in it! Attachment 33275