Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Burners won't stay lit (https://www.askmehelpdesk.com/showthread.php?t=49219)

  • Dec 18, 2006, 04:14 AM
    dvqjimbo1
    Burners won't stay lit
    -- need more help in figuring out flame sensor or roll out switch - Weather King --- ICECO --- 80 PJ --- forced air --- Honeywell valve (on/off switch)---burners light for 1 or 2 seconds, then go out
  • Dec 19, 2006, 05:57 AM
    labman
    The flame roll out switch will be a little ceramic dodad with wires right where the flame will hit it. If it doesn't send a signal to the board, it will shut the gas off in a few seconds. Clean up the metal contacts. Replace it if broken or cracked.
  • Dec 19, 2006, 08:57 AM
    rickdb1
    Sounds like the flame sensor. Are the flames rolling out? If so, you may have other problems... Very simple to bypass the roll-out for testing...

  • All times are GMT -7. The time now is 04:56 AM.