Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Craftsman weed eater won't stay running (https://www.askmehelpdesk.com/showthread.php?t=480829)

  • Jun 18, 2010, 01:19 PM
    NoGoProb
    Craftsman weed eater won't stay running
    I have a 2 yr old 25cc Craftsman POS weed eater. It starts on one pull and runs perfect for about 3 minutes, then boggs out. I have replaced fuel lines and filters, replaced the gas with a perfect mix, cleaned air filter, and stripped down and cleaned the carb fully. I am real close dumping it and buying an electric one. I saw several similar posts - is Craftsman just junk nowadays? Any ideas to salvage it?
  • Jun 18, 2010, 01:31 PM
    adam_89

    How about the spark plug? Anyway, does Craftsman warranty their tools like that?
  • Jun 18, 2010, 07:23 PM
    DG

    Sounds like it needs a new diaphram and gaskets installed in the carb and the carb mixture screws set
    But craftsman weedeaters are made by the cheapest bidder.

  • All times are GMT -7. The time now is 07:17 PM.