I have a LUX 1500 series thermostat, my existing wiring is Red, White, Green and a light blue ( total 4 wires ).
Also my home is gas heat forced hot air / with a central air cooling system.
Current problem, I have heat, but no ac. I don't believe I wired correctly, and don't know if I need a jumper wire...
Thank you in advance, Sebastian
[email protected]

Rh jump to rc. Hook to red
Blue to y if you have no yellow wire
Green to g
White to white.

Quote:

---

Originally Posted by Joshdta

rh jump to rc. hooh to red
blue to y if you have no yellow wire
green to g
white to white.

---

Thank you,
One last question, I don't have any "jumper wire" for my thermostat, what type of wire do I need to buy ? I have a Home Depot or Lowe's nearby ?

Just cut off a extra piece of wire from your stat. all you need is a small piece. If you can not find a extra piece at the stat look in the bottom door of the furnace. Odds are there will be plenty extra there.

Quote:

---

Originally Posted by Joshdta

just cut off a extra piece of wire from your stat. all you need is a small piece. if you can not find a extra piece at the stat look in the bottom door of the furnace. odds are there will be plenty extra there.

---

Thanks a million... and if I had it, I send you some... j/j
You are a great help and I appreciate it.

I'm a Police Officer in Ct, let me know if you have any questions I can help you with.

Sebastian

I have a base board heating system . I have just two wire . I have lux thomometer . The upper witches are fan, on,and auto wile the bottom is heat, off and cool on the right hand is a little window that show the digital under that se=reem is the words temperature follow by two push stitch down and up