Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   John deere L120 (https://www.askmehelpdesk.com/showthread.php?t=394263)

  • Sep 7, 2009, 10:22 AM
    mdj577
    John deere L120
    Engine stalls as soon as mower deck is engaged. Any suggestions?

    Thanks in advance.
  • Sep 7, 2009, 11:14 AM
    crigby

    Hi,
    Some of the L120/L130s were susceptible to wiring harness damage. In rare occasions it is near the PTO clutch plug. Most often it is somewhere along the right side of the frame in what is called the rear harness (it is the part going to the seat switch.) Check those wires for damage/breakage.
    Peace,
    Clarke
  • Sep 7, 2009, 07:17 PM
    mdj577
    Quote:

    Originally Posted by crigby View Post
    Hi,
    Some of the L120/L130s were susceptible to wiring harness damage. In rare occasions it is near the PTO clutch plug. Most often it is somewhere along the right side of the frame in what is called the rear harness (it is the part going to the seat switch.) Check those wires for damage/breakage.
    Peace,
    Clarke

    Thanks! Found the problem. Was loose plug at theseat switch.

  • All times are GMT -7. The time now is 01:08 AM.