3 Attachment(s)
14.5 B&S OHV Carb linkage
I have an MTD Yard Machine with a B&S 14.5 OHV. I was given this mower a week or so ago by a "friend". It didn't run when I got it as it had been sitting for about a year. I freed up the motor and put a new battery and solenoid on it. I drained the gas and put some new in it and adjusted the valves to their correct clearance. I had to clean the starter and flywheel and finally it cranked a few days ago. It did not run long and then cut off. It cranked back up the next few times with the same result. Now, it will turn over but won't start, I have a spark. I took off the air cleaner and housing and am looking at the carb/choke linkage. I noticed there is a small think spring on part of the linkage but do not know what it is or if it is hooked up correcly. I have tried to find some linkage pics on the web but there arten't any to be found. The motor is a 287707-1224E1. I have also uploaded some pics to see if the linkage may be the issue was to why it won't run.