Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Supply Line Size- 3 Full Baths (https://www.askmehelpdesk.com/showthread.php?t=367069)

  • Jun 20, 2009, 07:18 AM
    electromechanic
    Supply Line Size- 3 Full Baths
    What size supply line is required for 3 Full Baths. We are on City(St. Louis) water supply.
  • Jun 20, 2009, 08:07 AM
    speedball1
    Will this be a residential or commercial installation? Will the baths be in use at the same time? Any more details to give us? Tom
  • Jun 20, 2009, 08:42 AM
    Milo Dolezal

    I would not go smaller than 1" main run with 3/4" branches for each bathroom. Hot water not smaller than 3/4".
  • Jun 20, 2009, 11:16 AM
    electromechanic

    Reisdential. Wife, two teens, yes, they will most likely be in use at the same time. We currently have 1 full bath and half bath in basement. The plan is to in$tall a full bath in the first floor and a 2nd floor laundry, the wife was concerned about me lugging the laundry from the basement. I'm sure the half in the basement will become a full.
  • Jun 20, 2009, 02:35 PM
    speedball1
    My area runs a size smaller then Milos but if they're going to be used at the same time I'd go with his sizing. Good luck, tom

  • All times are GMT -7. The time now is 11:51 PM.