How do you tell if a shift cable needs to be replaced or lubed. Shift lever is rough to shift up and down through the gears.

Thought:

The problem may be with a worn Transmission Range Sensor (TRS), which is located on top of the transmission. The shift linkage likely goes directly to the TRS, which may be worn or out of adjustment. In some situations, an alignment tool is needed to properly adjust the TRS.

Stop dropping it down gears and ragging on it... sounds like worn out linkage parts... crawl under there and have a look-see...

Quote:

---

Originally Posted by cowdough

stop dropping it down gears and ragging on it....sounds like worn out linkage parts....crawl under there and have a look-see....

---

I am not a hot rodder ,I have had a mechanic look at everything and he thinks it's the cable and I need to get type or number to order a cable .Where is the numbers located on the trans ?

Quote:

---

Originally Posted by bobnp

I am not a hot rodder ,I have had a mechanic look at everything and he thinks its the cable and I need to get type or number to order a cable .Where is the numbers located on the trans ?

---

To be or not to be