I had a white-rodgers thermostat 1f58w-58. I switched it to a hunter 44860, and it only blows heat its hooked as y1=yellow,y2=brown,w2=black,g=green,r=rh,rc/r=pink,c=blue,w1=white. Where did I go wrong?

Exactly how was the old thermostat wired. I hope you kept a copy of the terminal designations you wrote down before the start of the project as instructed in the install instructions. Many times the color code does not match the standard wiring color code because some installers follow there own little wiring code setup.

Quote:

---

Originally Posted by hvac1000

Exactly how was the old thermostat wired. I hope you kept a copy of the terminal designations you wrote down before the start of the project as instructed in the install instructions. many times the color code does not match the standard wiring color code because some installers follow there own little wiring code setup.

---

Don't know how the old one was installed guess I'm up a creek, wife tried installing it before I got home. And told me to finish. Thought that's the only way I would start it. Is there any thing I can do?

http://www.white-rodgers.com/wrdhom/.../0037-3926.pdf


http://www.white-rodgers.com/wrdhom/..._06_pg0192.pdf


These are wiring diagrams for your old WR stat