I have a Indak Rotary 4 position switch part # 2G754A. Can any one tell me how to wire to a fan, or are there wireing diagrams available some where. Thanks Bill

This may help:

http://www.indak.com/products/standa...pos_square.htm

Thanks Statmando. Yes I was in that site. The trouble is I could not find a wire diagram. I am not using this for a fan so I need to know what each post is for. Thanks Bill

That switch is the top of the list, and it shows the circuits made(contacts)Poor info as photo shows numbers, and list uses letters(idiots)
A meter can identify which is which through a few test, You won't be able to use it as your standard 4 position Rotary.

You think you have problems, try finding a plug to fit the 5 posts.

The posts are labeled B = battery L= lo M= medium H= high and C = ? Usually not used. Lo-Med-and Hi usually go through an Indak resistor.