Installing central A/c and heat
I plan on installing central heat and a/c to an old Jim walters home which is 2 story. I feel that I should have separate units for each floor, but an wobdering if this is cost effective. I am guessing that each level is about 1000 sq ft. The lower is well insulated , but the upper, we feel has very little. I hope to correct this but later this year. I have done no research on this yet, but I am wondering what size unit for each floor? I am in central Texas and I like my house cool. Also if anyone has recommendations as to a brand. I think that the ducts will have to be put in some kind of drop down area for downstairs and possibly the floor for upstairs as there is no attic. There is only about 1 inch between the roof and the ceiling at this time.( when I had the roof installed the roofing nails came through the ceiling.)