I have a 89 crx si

I replace the pistons with high compression and new fuel pump and relay at first I was missing a ground for the pcm and then I fix that I thouht that it would fix my problem but no

It turns on and runs but when I push it like past 6k after a while it dies and then it doesn't want to turn back on ill wait for like 5 to 10 min and then it start back up and it does the same thing if I push the car hard

I replace wire and plugs and dizzy I thougt it could be the resistor box but not sure at this moment

Replace the Ignition Control Module (ICM) and coil:

https://www.askmehelpdesk.com/cars-t...tml#post265896