Hello,
I have a Vita Spa that is showning hi-li in the digital pad? The jets still run, but what is this? Thanks.

Guess: High Limit

Might be a warning that the maximum temperature of the spa is reached or it might be that the temperature sensor failed and the spa went to over temp.

I didn't do any searching.

Hello KeepItSimpleStupid,
Thanks for your reply!
The temp reading was at 102 (I have had it this high before), but I lifted the cover for a while and the temp. dropped. It is at 95 now and has been for 3 days. The filtering settings still come on and the jets still run. The spa is not that hot, but I can't get the hi-li to stop showing. I have even tried the reset where you hold the down button for 5 seconds, but after it sounds like air is being released, it comes back on. I just had the thermostat replaced- maybe a year ago. Could it be the keypad?

It's described here:

Troubleshooting Error Code: Vita Spas

Thank you! This is even better than the manual the previous owners of the house left me! This will be very helpful. Hope you have a great holiday.

Steel-Chic - were you able to fix your "HI LI" issue?

My Vita Spa just started showing this on my spa after I replaced the circulation pump.

Thanks!

I can not get my spa to lower it's temperature? How do I do this. I lowered down to 80 but it doesn't drop and it's a new hot tub.