Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Pressure lower after turning on the faucet spray OK (https://www.askmehelpdesk.com/showthread.php?t=272759)

  • Oct 23, 2008, 10:33 AM
    cindy0480
    Pressure lower after turning on the faucet spray OK
    I have this kitchen faucet. When turning on, the pressure is OK. Later the pressure lower after a sound. The spray is OK. It started to happen recently. Was good. Anything wrong?
  • Oct 23, 2008, 11:13 AM
    speedball1
    Quote:

    Originally Posted by cindy0480 View Post
    I have this kitchen faucet. When turning on, the pressure is ok. Later the pressure lower after a sound. The spray is ok. It started to happen recently. Was good. Anything wrong?

    Are you saying that it comes on with pressure, then makes a noise and the pressure drops from the spout but not the spray? What type of faucet do you have? One handle or two knobs? What's the brand name? How old?
    Let me know. Regards, Tom
  • Oct 23, 2008, 11:17 AM
    cindy0480
    It comes on OK. Then you can hear a deep "pum" sound somewhere in the faucet, and the pressure drops on the spout not the spray. It's a moen. One handle. Should be 10 years old since the house was built in 1998. Thanks.
  • Oct 23, 2008, 12:44 PM
    speedball1
    Quote:

    Originally Posted by cindy0480 View Post
    It comes on ok. Then you can hear a deep "pum" sound somewhere in the faucet, and the pressure drops on the spout not the spray. It's a moen. One handle. Should be 10 years old since the house was built in 1998. Thanks.

    OK Ciundy,
    This,(see image)shbould be pretty close to what you have. I think the problem may be in the diverter located under the spout. Shut the water off an d remove the spout and diverter. Look for trash down there and clean up any crud. Before you button up ploace a pan over the faucet and turn the water back on for a few seconds to flush out the valve body. Reassemble and test. Ifc you still have a problem click on back. Good luck, Tom

  • All times are GMT -7. The time now is 02:49 PM.