I am currently remodeling my kitchen. I would like to knock out the wall where the kitchen sink/plumbing is and install an island. The sink would remain in that same place except it would be placed in the island. How do I re-route the vent?
|
I am currently remodeling my kitchen. I would like to knock out the wall where the kitchen sink/plumbing is and install an island. The sink would remain in that same place except it would be placed in the island. How do I re-route the vent?
This is calledl a island sink vent and can be installed one of two ways. One is a regular island vent,(see image) and the other is a simpler version using a AAV,(see image). If a permit will be pulled check with your Building Department to see if you can use a AAV. If you'renot going to be inspected then it's your choice. Good luck, TomQuote:
Originally Posted by lilibelle108
| All times are GMT -7. The time now is 02:29 AM. |