Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Vibration in pipes after toilet flush (https://www.askmehelpdesk.com/showthread.php?t=239825)

  • Jul 21, 2008, 05:21 AM
    ron725109
    vibration in pipes after toilet flush
    My toilet is 6 months old
    After I flush my toilet,about 3 or 4 seconds later it sounds like a vibration noise in my pipes in the basement
    This has done this for a long time
  • Jul 21, 2008, 05:31 AM
    speedball1
    Hey Ron try this!
    I'm assuming that you have a floatball ballcock,(see image). Shut the water off at the stop and remove the three screws on top of the ballcock. Pull the float ball and stem assembly up and out. Pry the washer out and reverse it, being sure to seat it in firmly. Now hold your hand over the open ball cock and turn the water back on for a few seconds to flush out the supply. Reassemble and give it a flush. Sound all gone? Good luck, Tom

  • All times are GMT -7. The time now is 08:45 AM.