Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Can't get Craftsman Mower started (https://www.askmehelpdesk.com/showthread.php?t=222576)

  • Jun 2, 2008, 06:56 PM
    heatha
    Can't get Craftsman Mower started
    I was mowing my lawn and I hit a rock. The mower stopped and noticed it was low on gas. I filled it up and now I can't get it started! I changed the air filter, spark plug, and put in fresh gas. I've found some links saying that it might be the safety switch, but I have checked the Sears links and checked the manual and can't find where the safety switches are! This mower is only a couple of years old! It doesn't seem like it's getting a spark.

    Please help! My lawn is taking over my house!

    Thanks! The model number is 917.388690

    Heath
  • Jun 2, 2008, 07:19 PM
    blairwtsn
    Did you check the oil level?
    Sometimes when your oil level is very low it will not start.
    Even if it was running a few minutes prior.

    Learned that lesson with a snowblower ;)

    Blair
  • Jun 2, 2008, 07:33 PM
    heatha
    I checked it, it is full. I dumped a little out the other day, because it looked a little too full.
  • Jun 2, 2008, 07:42 PM
    blairwtsn
    Then it is possible that youu bent the blade shaft when you hit the rock.

    Blair

  • All times are GMT -7. The time now is 01:48 PM.