I need to know how to replace gas lines to a craftsman weedeater mod# 358798470 or a website with diagram and instructions.
Thanks
Jim

Well, cut the end going into the tank at an angle of about 60 degrees and you may need some forceps to pull the line up out of the filler neck to cut off straight, then add the weighted fuel filter.
You can try,
Sears.com
Have your model number handy, and sometimes the serial number is needed.

Quote:

---

Originally Posted by MOWERMAN2468

well, cut the end going into the tank at an angle of about 60 degrees and you may need some forceps to pull the line up out of the filler neck to cut off straight, then add the weighted fuel filter.
you can try,
sears.com
have your model number handy, and sometimes the serial number is needed.

---

Thank you.. I have gotton that far but There are two line connections on the carburator and two connections on the primer bulb. I need to know how this chinese puzzle is supposed to be hooked up. What goes where?
Thanks

MM gave you the wrong URL. It's www3.sears.com. They usually have exploded diagrams for just about anything.