I've read what to do for a regular dryer and replacing the bearing but is it the same for a stacking unit with the dryer on top?

I would be fairly certain that the basic design of the stacking dryer is the same as a conventional dryer.

Hope this helps.
Wally H.

Quote:

---

Originally Posted by mamameins

I've read what to do for a regular dryer and replacing the bearing but is it the same for a stacking unit with the dryer on top?

---

Hi,
I just followed appleguys instructions on a fridgedar gallery stacking unit. I love you appleguy. Silence is golden!! If you give me your paypal I will send you $10 gladly.

Note: there are two screws in the front of the stacking unit covered by plastic tabs, before following appleguys awesome instructions, remove the plastic covers, remove two screws and that unit comes right off no problem!!

Appleguy for president!!