Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Mtd bolens hotwired part 2 (https://www.askmehelpdesk.com/showthread.php?t=171100)

  • Jan 10, 2008, 07:52 PM
    kiethy
    Mtd bolens hotwired part 2
    OK had a good look at coil and found a tang that obviously was meant to have a wire, so I solded one on. My understanding is that when this wire grounds it will kill the motor, so it should go to a switch and then to ground. Other mtd's seem to ground it first and then off to other safety switches... how does that work?
  • Jan 12, 2008, 06:47 AM
    MOWERMAN2468
    With the use of an insulated connection block.
  • Jan 14, 2008, 01:35 PM
    kiethy
    OK, so is it not really going to ground? I have run it to a switch and then to ground, any probs with that setup? It is working,

    Thanks for reply

  • All times are GMT -7. The time now is 12:27 PM.