I had my pressure washer plugged into my patio outside outlet while spraying down the deck directly above the patio. The pressure washer plug/patio outlet got wet from the water coming down from the deck and the pressure washer stopped. I relocated the plug to the one on the deck and it too eventually went dead. None of the circuit breakers tripped, but I turned them off then on again and still no power to the outlets. Any suggestions on what I can do?

First you have to determine if outlet has power -- a corded radio works

Set radio to station and make sure it's working -- then test outlet

Any power tool or trouble light will also work for the test

I like a radio as you can test breakers and hear when power is on

If there is power at outlet problem is with power washer

Some units like this have overloads with a reset on the motor

Hope this helps -- Please rate my answer

Look for a GFCI somewhere. It is their job to shut the power off if the outlet gets wet or other ground faults. They have been required for outside outlets for a long time. One GFCI can protect a number of outlets. Finding it and pushing the reset may be all you need to do. GFCI protected outlets should be marked.

Many thanks for all your efforst... I'll give it a go when I get home tonight... and by the way... GO Big Red!!