I have a neo angle shower stall with a cracked basin. I have it all disassembled but the base and can't see the right way to disconnect the drain pipe before removing the basin. It is PVC pipe. I can't see how to get the basin out either without cracking it into pieces. I'm guessing I don't need to even attempt to take out the basin until the drain pipe is diconnected. Need some advice.

Quote:

---

I'm guessing I don't need to even attempt to take out the basin until the drain pipe is diconnected

---

Not quite so. The PVC drain is glued to the trap raiser. Take a Saws-All and saw out the shower base leaving the drain. You may then cut the drain out.
Good luck, tom